Brocade Communications Systems Brocade 6510 Release Note page 66

Defect ID: DEFECT000342412
Summary: TPERF session may not be able to be restarted until all user disabled GE ports on the test
tunnel are re-enabled.
Symptom: If a user disables GE ports on a TPERF test tunnel while a TPERF session is in progress and
the TPERF session is terminated, TPERF may not be able to be restarted until the disabled
GE ports are re-enabled. When in this state, when the user attempts to re-start TPERF, they
will get a message indicating that a TPERF session is already in progress.
Feature: FCIP
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000342738
Summary: Enhancement to BE credit loss detection and recovery
Symptom: When BE credit is lost, customer needs to reseat blade to recover. This release added
options to generate link reset, port re-init, and blade fault depends on user configuration
upon defect BE credit lose. Refer to bottleneck on man page: bottleneckmon --
cfgcredittools -intport –recover [off | onLrOnly | onLrThresh]
Feature: 8G ASIC Driver
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000343519
Summary: FICON: Local LPATHS not cleared from CUP LPATH db upon implicit logo for port disable
Symptom: Potential inability for FICON channels to successfully establish logical paths to the CUP, in
configurations where there are a large number of sub-channels defined to the CUP.
Feature: FICON
Probability: High
Found in Release: FOS7.0.0
Defect ID: DEFECT000344506
Summary: Port fenced during supportsave
Symptom: Port without errors are fenced during supportsave
Feature: FABRIC WATCH
Probability: Low
Found in Release: FOS6.4.0
Defect ID: DEFECT000349008
Summary: DP panicked after modifying metric on FCIP Circuit using a crossport with IPSec enabled
Symptom: Tunnels for DP complex go down do to FFDC for Soft Fault on DP after modifying the metric
on a standby FCIP Circuit on a crossport with IPSec enabled.
Workaround: Disable IPsec on FCIP tunnel.
Feature: FCIP
Probability: Low
Found in Release: FOS7.0.0
Fabric OS v7.0.1 Release Notes v1.0
Closed with Code Change in Fabric OS v7.0.0a
Technical Severity: Medium
Function: FCIP CLI
Technical Severity: Medium
Function: ASIC Driver
Technical Severity: Medium
Function: Ficud
Technical Severity: Medium
Function: PORT FENCING
Technical Severity: Medium
Function: Other
Page 66 of 67