Brocade Communications Systems Brocade 6510 Release Note page 55

Defect ID: DEFECT000352764
Summary: Remote data replication application fails with multiple paths (multiple port pairs between
arrays) when FastWrite is enabled on the FCIP tunnel.
Symptom: With FastWrite enabled on an FCIP tunnel, and two data replication port pairs, the
application commands to move data between the arrays will fail. With only a single port
pair or with FastWrite disabled, everything works fine.
Feature: FCIP
Probability: High
Found in Release: FOS7.0.0
Defect ID: DEFECT000353981
Summary: D-Port failures seen in stress and corner case scenarios.
Symptom: D-port test stays "in progress" for a long period of time and eventually times out.
Workaround: portdporttest --stop and disable/enable the port
Feature: FC Services
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000354980
Summary: FIPS: Firmwaredownload signature verification fails for directors
Symptom: During a firmwaredownload, invalid packages might not be detected by directors. This
could lead to invalid packages being loaded as valid firmware.
Feature: FOS-Infrastructure
Probability: Medium
Found in Release: FOS7.0.0
Defect ID: DEFECT000355613
Summary: Fabricd crash encountered during D-port testing
Symptom: Fabricd crash could be encountered when utilizing D_Port functionality
Feature: FC Services
Probability: Medium
Found in Release: FOS7.0.0
Defect ID: DEFECT000355830
Summary: Fabric Watch and Port Fencing Threshold settings should not apply to D-Ports.
Symptom: D-Ports become fenced during d-port testing.
Feature: FABRIC WATCH
Probability: Medium
Found in Release: FOS7.0.0
Fabric OS v7.0.1 Release Notes v1.0
Closed with Code Change in Fabric OS v7.0.0b
Technical Severity: High
Function: Emulation
Technical Severity: High
Function: D-port
Technical Severity: High
Function: Firmware Download
Technical Severity: High
Function: D-port
Technical Severity: High
Function: PORT FENCING
Page 55 of 67