Brocade Communications Systems Brocade 6510 Release Note page 57

Defect ID: DEFECT000357943
Summary: Trackchanges is not generating TRK-1003 for SSH logout.
Symptom: With a Trackchanges setting of 1,1, the track changes feature is not generating the TRCK-
1003 message when a SSH session is logged out.
Feature: FOS Security
Probability: High
Found in Release: FOS6.4.1
Defect ID: DEFECT000359245
Summary: The NS contains stale entries after a bad disk is remove from a loop attached device.
Symptom: When a disk is removed from a loop attached device, the pid still shows up in the name
server.
Workaround: port bounce where the device connected.
Feature: FC Services
Probability: Medium
Found in Release: FOS6.3.2
Defect ID: DEFECT000359493
Summary: If FX8-24 blades are swapped, the Inband Mgmt configuration is not properly loaded onto
the new blade.
Symptom: Inband Mgmt is not functioning after FX8-24 blade is replaced (swapped).
Workaround: Reboot CP
Feature: FCIP
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000360527
Summary: An FCIP Tunnel in an FCR Backbone may lose buffer credits and go down if FastWrite is
enabled.
Symptom: FCIP Tunnel in an FCR backbone fabric goes down due to credit loss.
Workaround: Disable FCIP FW.
Feature: FCIP
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000349412
Summary: portcfgshow output displays "Fill Word (Current)" incorrectly
Symptom: portcfgshow displays incorrect values for "Fill Word (Current)" field
Feature: 8G ASIC Driver
Probability: Medium
Found in Release: FOS7.0.0
Fabric OS v7.0.1 Release Notes v1.0
Closed with Code Change in Fabric OS v7.0.0b
Technical Severity: High
Function: Authentication
Service Request ID: 631887
Technical Severity: High
Function: Name Server
Service Request ID: 641021
Technical Severity: High
Function: Other
Technical Severity: High
Function: Other
Technical Severity: Medium
Function: Other
Page 57 of 67