Monitor Back Panel - Dish Network D52W20BYX1 User Manual

Hd monitor
Table of Contents

Advertisement

Monitor Description
Front Panel Connections
The monitor has front panel connections
for
convenience:
one set of audio/video
inputs,
an S-video input, and a headphone
jack.
Note: These connections
may be on the side
of the monitor.
¢_ ,L,_:o,°. v,ooo,°
Headphones
Connect headphones
to listen to the sound coming from the monitor, For
instructions
on how to adjust the headphone
audio settings, see page 8,
L/Mono and R Audio In
The L/MONO (white) and R (red) connectors
receive audio from another
device such as a VCR, camcorder,
or video game console,
Video In
The VIDEO IN (yellow)
connector
receives video from another device such as
a VCR, camcorder,
or video game console. For information
on how to
display video from this input, see page 8.
S-Video
The S-VIDEOreceives
video from another device, Make sure you also
connect audio cables from the device to the monitor's
RCA-type
audio
connectors.
For information
on how to display video from this input, see
page 8.
Note: Do not try to use the S-VIDEO and VIDEOIN al the same time because
the two signals interfere
with each other.
Monitor Back Panel
DishDVI
Input
Connect a DishDVI-equipped
DISH Network
HD receiver. For information
on how to display
video from this input, see page 8.
DIsHDVI - Provides
a high-quality
digital
video interface.
L/MONO and R (RCA-type
audio) - Provides
left (white) and right (red)
audio connections
when using the DIsHDVI video input.
Note: Remember
to connect the left and right audio cables because
the
DIsHDVI cable carries the piclure signal, not the sound.
[li_L_E4

Advertisement

Table of Contents
loading

Table of Contents