Dish Network D52W20BYX1 User Manual page 11

Monitor Back Panel
Component Inputs
Connect a component video source, such as
a DVD player, to CMP1 or CMP2, For
information on how to display video from
this input, see page 8,
Y-PB-PR (Component Video) - Provides
¥
PB PR
L/MONO
R
ps pa LI_o.o R 7
COMPONENT INPUTS
optimum picture quality because the video is separated into three
signals: Y (green), PB (blue), and PR (red),
L/MONO and R (RCA-type
audio) - Provides left (white) and right (red)
audio connections when using COMPONENT INPUTS,
Composite Inputs
Connect another device, such as a VCR or
DVD player, to VID1 or VID2, For
information on how to display video from
this input, see page 8,
COMPOSITE INPUTS
S-VIDEO
-
Provides better picture quality
than the RCA-Type Video (yellow)
connections because the color part of the
signal is separated from the brightness
part of the picture.
V (RCA-Type Video) - The yellow input provides video connection.
Note: Do not try to use the S-VIDEOand VIDEOIN at the same time
because the two signals interfere with each other.
L/MONO and R (RCA-type
audio) - Provides left (white) and right (red)
audio connections when using either composite video connection
above,
Audio/Video Outputs
Connect an amplifier, audio receiver, or
external video monitor.
FIXEDAUDIO L/R - Provides fixed-level
audio output from the monitor. This audio
output is ideal for connecting to an
audio/video (A/V) receiver when you
want to control the volume through the
A/V receiver.
S AUDIO/VIDEOOUTPUT
-
FIXED AUDIO
AUDIO
\ SUBINOOFEB L
VARIABLE AUDIO L/R - Provides variable-level audio output. Volume
levels are controlled by the volume controls on the monitor and remote
control.
V (RCA-Type Video) - Provides composite video connection,
Note: This video output does not include menu overlays
or messages.