What To Do If - AEG BP9314001 User Manual

38 www.aeg.com
Installing the door and the
glass panels
When the cleaning is completed, install
the glass panels and the oven door. Do

13. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
Problem
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The display shows
F111.
The lamp does not
operate.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The Child Lock is activated. Refer to "Activating and
The fuse is released.
The CT Sensor plug is not
correctly installed into the
socket.
The lamp is defective.
8. Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
9. Clean the glass panel with water
and soap. Dry the glass panel care-
fully.
the above steps in the opposite se-
quence. Install the smaller panel first,
then the larger.
Activate the appliance.
Set the clock.
Check the settings.
deactivating the Child Lock
function".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Put the plug of core tem-
perature sensor as far as
possible into the socket.
Replace the lamp.
on the front frame of the appliance cavi-
ty.
.........................................
Remedy