Helpful Hints And Tips - AEG BP9314001 User Manual

20 www.aeg.com
5.
Press
display shows SET + GO .
6. Press OK to confirm.
To start SET + GO , press a sensor field
(except for
starts.
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the function Function Lock is on.
The automatic switch-off works
with all functions, except Light ,
Duration , End Time and Core
Temperature Sensor.
10.6 Cooling fan
When the appliance operates, the cool-
ing fan activates automatically to keep

11. HELPFUL HINTS AND TIPS

11.1 Inner side of the door
In some models, on the inner side of
the door you can find:
• The numbers of the shelf positions.
• Information about the heating func-
tions, recommended shelf positions
and temperatures for typical dishes.
The temperature and baking
times in the tables are guidelines
only. They depend on the rec-
ipes and the quality and quantity
of the ingredients used.
again and again until the
). The set heating function
Temperature
30 °C - 115 °C
120 °C - 195 °C
200 °C - 245 °C
250 °C - maximum °C
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If a heating function operates.
• If you do not change the oven temper-
ature.
Switch-off time
12.5 h
8.5 h
5.5 h
3.0 h
the surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appli-
ance cools down.
11.2 Advice for special
heating functions of the oven
Keep Warm
Use this function if you want to keep
food warm.
The temperature regulates itself auto-
matically to 80 °C.
Plate Warming
For warming plates and dishes.
Distribute plates and dishes evenly on
the oven shelf. Move stacks around after
half of the warming time (swap top and
bottom).
The automatic temperature is 70 °C.
Recommended shelf position: 3.