Table of Contents
Advertisement
16 www.aeg.com
8.3 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
Activating the function:
1.
Activate the appliance.
2.
Select Assisted Cooking . Press OK
to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select the Weight Automatic . Press
OK to confirm.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature
• The core temperature
Only use the core temperature
sensor supplied or the correct re-
placement parts.
Using the core temperature sensor:
1.
Put the tip of the core temperature
sensor into the centre of the meat.
2.
Activate the appliance.
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
5.
Use the shuttle to set the food
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Use
the shuttle to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the sig-
nal.
With some programmes turn
over the food after 30 minutes.
The display shows a reminder.
The display shows the core tempera-
ture sensor.
4.
Use the shuttle in less than 5 sec-
onds to set the core temperature.
5.
Set the oven function and, if neces-
sary, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is dif-
ferent for different quantities of
food, set oven temperatures (mini-
mum 120 °C) and operating modes.
The appliance calculates the end
time in approximately 30 minutes.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
6.
When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
Advertisement
Table of Contents
