Table of Contents
Advertisement
Basic Operation —Continued
Displaying Source Information
You can display various information about the current
input source as follows.
RECEIVER
DISPLAY
Press the [RECEIVER] button,
RECEIVER
and then press the [DISPLAY]
button repeatedly to cycle
through the available informa-
tion.
DISPLAY
The following information can typically be displayed for
input sources.
Input source &
volume
Signal format*
or sampling
frequency
Input source &
listening mode
*If the input signal is analog, no format information is
displayed. If the input signal is PCM, the sampling fre-
quency is displayed. If the input signal is digital but not
PCM, the signal format is displayed. Information is dis-
played for about three seconds, then the previously dis-
played information reappears.
Interpreting Surround Channel Values
A
B C
A: The number of front channels (3 means front left,
front right, and center).
B: The number of surround channels (2 means surround
left and surround right). If there's surround back
channel information, this will be 3.
C: LFE channel for subwoofer (1 means yes).
51
Advertisement
Table of Contents
