Table of Contents
Advertisement
Basic Operation —Continued
Using the Tuner
With the built-in tuner you can enjoy AM and FM radio
stations. You can store your favorite stations as presets
for quick selection.
Listening to the Radio
1
Use the [TUNER] input selector
button to select either AM or FM.
In this example, FM has been selected.
Band
(Actual display depends on country.)
Tuning into Radio Stations
■ Auto Tuning Mode
1
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
2
Press the Tuning Up or Down [ ]/
[ ] button.
Searching stops when a station is
found.
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator appears on the display, as shown.
52
■ Manual Tuning Mode
1
2
Frequency
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it's
0.05 MHz steps for FM and 9 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into weak FM stereo stations
If the signal from a stereo FM station is weak, it may be
1
2
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
TUNED
AUTO
FM STEREO
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
Press and hold the Tuning Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
Advertisement
Table of Contents
