Table of Contents
Advertisement
First Time Setup —Continued
Equalizer Setting
This setting is set automatically by the Automatic
Speaker Setup function (see page 37).
Here you can adjust the EQ of individual speakers. The
volume of individual speakers can be set on page 46.
1
2, 3
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
RECEIVER
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [ENTER].
ENTER
The Speaker Setup menu appears.
Menu
------------------------
Basic Setup
2.Speaker Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Speaker Config
ENTER
2.Speaker Distance
Advanced Setup
3.Level Calibration
3.Surround Setup
4.Equalizer Settings
4.Audio Adjust
5.Listening Mode Preset
3
Use the Up and Down [
buttons to select "4. Equalizer
Settings," and then press
ENTER
[ENTER].
The Equalizer Settings menu appears.
ENTER
4
ENTER
5
ENTER
2–7
1, 8
6
ENTER
]/[
]
7
8
]/[
]
Notes:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Use the Left and Right [
]/[
buttons to select:
Off: Tone off, response flat.
Auto: The tone for each speaker is
set automatically by the Auto-
matic Speaker Setup function.
Manual: You can adjust the EQ of each
speaker manually.
If you select Manual, continue with this
procedure. If you select Off or Auto, go
to step 8.
Use the Down [
] button to
select a speaker.
Menu
------------------------
Basic Setup
2.Speaker Setup
1.Initial Setup
------------------------
2.Speaker Setup
1.Speaker Config
2-4.Equalizer Settings
2.Speaker Distance
Use Settings
:Manual
Advanced Setup
3.Level Calibration
------------------------
3.Surround Setup
4.Equalizer Settings
Left
4.Audio Adjust
a.
80Hz
:
0dB
5.Listening Mode Preset
b. 250Hz
:
0dB
6.Preference
c. 800Hz
:
0dB
d.2.5kHz
:
0dB
e.
8kHz
:
0dB
Use the Up and Down [
]/[
buttons to select a frequency,
and then use the Left and Right
[
]/[
] buttons to adjust the
level at that frequency.
The volume at each frequency can be
adjusted from –12 to +12 dB in 1 dB
steps.
Tip: Low frequencies (e.g., 80Hz)
affect bass sounds; high frequencies
(e.g., 8kHz) affect treble sounds.
Use the Up [
] button to select
"Left," and then use the Left and
Right [
]/[
] buttons to select
another speaker.
Repeat steps 6 and 7 for each speaker.
Press the [SETUP] button.
The setup menu closes.
]
]
47
Advertisement
Table of Contents
