Wps Setup; Web Based Configuration Interface - Edimax BR-6475nD Quick Installation Manual

WPS Setup

If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use this
method to connect to the BR-6475nD's Wi-Fi networks.

Web Based Configuration Interface

For Mac/Linux users – or those who can't run the CD, you can setup the router
manually using the web based configuration interface.
1.
Enter http://192.168.2.1 into the URL of a
web browser and enter the username
admin and password 1234.
1.
Press the WPS/Reset button on the router
once to activate WPS for 2.4GHz Wi-Fi, or press
twice (within 5 seconds) to activate WPS for
5GHz Wi-Fi.
2.
Within two minutes, press and hold the WPS
button on the wireless device/client to activate
its WPS.
3.
The devices will establish a connection. Repeat
for additional wireless devices.
Note: Please check the instructions for your
wireless device for how long you need to hold
down its WPS button to activate WPS.
2.
9
Select "General Setup" from the top
menu and "WAN" from the submenu.
Choose your connection type – for
most users it is "Dynamic IP". If you are
unsure, please contact your Internet
Service Provider (ISP). Click "Apply" and
then "CONTINUE".