Joining A Network - Edimax HP-5101 User Manual

Powerline adapters

Hide thumbs Also See for HP-5101:

Table of Contents

6.2 Joining a Network

If you want to add a new powerline adapter to an existing network, follow the

following procedures:

Step 1 Press the "Group/Reset" button on an adapter in the existing network (adapter A

or B) for less than 3 seconds. The Power LED will start to blink.

Step 2 Within 120 seconds after the Power LED starts blinking on adapter A or B, press

the "Group/Reset" button on the new adapter (adapter C) for at least 3 seconds.

Step 3 Wait for the connection to be established.

Table of Contents

Hp-5101k