Status And Error Messages - Epson B-300 User Manual

Status and Error Messages

This section describes the meaning of messages displayed on the LCD screen.
The table below describes the status messages.
Message
Cancel
Charging ink
Cleaning
Please wait
Printing
Ready
Power save
Power off
The table below contains error messages, a brief description of each message and
suggestions for correcting the problem.
Message
Service call see guide
Printer near end of
service life
Nozzle maint error see
guide
Description
The print job is canceled.
The printer is charging the ink.
The printer is cleaning the print head.
The printer is starting.
The printer is initializing the settings.
The printer is processing data.
The printer is ready to print.
The printer is in the power save mode.
The printer is shutting down.
Problem
Service call error occurs.
Parts inside the printer are at the
end of their service life.
Print head nozzles are clogged or
misaligned.
Solutions
Turn off the printer and then back
on. If the error does not clear,
contact Epson.
& See "Where To Get Help" on
page 182.
Contact Epson to replace the
parts.
& See "Where To Get Help" on
page 182.
Perform a nozzle check and print
head cleaning.
& See "Checking the Print Head
Nozzles" on page 137.
& See "Cleaning the Print Head"
on page 139.
Press the OK button to recover
from error status.
Using the Control Panel
110