Epson B-300 User Manual page 116

Maintenance box at the end of its service life
The maintenance box is at the end of
its service life.
Maintenance box error
The maintenance box is not installed.
The maintenance box is not
detected.
The maintenance box cannot be
used with the printer.
The maintenance box cover is open.
Cartridge lever unlocked
The cartridge lever is in the unlocked
position.
Maintenance box nearing the end of its service life
The maintenance box is nearing the
end of its service life.
Paper out
Paper is not loaded.
Double feed error
The printer feeds more than one
sheet of paper at a time.
Paper jam
The paper is jammed.
Paper size error
The paper size set in the printer driver
and the size of loaded paper differ.
Duplex unit error
The duplex unit is not installed.
Replace the maintenance box.
Install the maintenance box.
Install the maintenance box again.
Install a genuine maintenance box.
Close the maintenance box cover.
Move the cartridge lever to the
locked position.
Obtain a new maintenance box.
Load the paper, and then press the
) Paper/Cancel button.
Remove the jammed paper, and
then press the ) Paper/Cancel
button.
Remove the jammed paper.
& See "The Paper Jams" on page
165.
Match the paper size setting.
Install the duplex unit.
Using the Control Panel
116