ECS K8T890-A Manual page 41

35
Suspend Mode (S1)
Use this item to define how your system suspends. In the default, S1, the suspend mode
is equivalent to a software power down. If you select S3, the suspend mode is a suspend
to RAM, i.e., the system shuts down with the exception of a refresh current to the
system memory.
Suspend Time Out (Disabled)
This item sets up the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend mode.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume at a fixed time based on the system's RTC (realtime clock). Use
the items below this one to set the date and time of the wake-up alarm. You must use an ATX
power supply in order to use this feature.
LAN/Ring Power On (Disabled)
The system can be turned off with a software command. If you enable this item, the system
can automatically resume if there is an incoming call on the Modem/Ring, or traffic on the
network adapter. You must use an ATX power supply in order to use this feature.
Keyboard Power On (Disabled)
If you enable this item, system can automatically resume by pressing any keys or power key
or typing in the password on the keyboard. You must use an ATX power supply in order to
usethis feature.
Wake-Up Key (Any Key)
This item set the wake-up key to wake up the system.
S3 USB Device Wakeup Function (Disabled)
This item enables or disables the wake-up function of USB device.
Press <Esc> to return to the main menu setting page.
Using BIOS