Starting A Function; Canceling A Function - Whirlpool RMC275PD Use And Care Manual

Command pads
The command pads tell the oven what to do
and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on when
you press the Start/Enter pad for an oven
function.
Using the control lock
The control lock prevents unwanted use
of the oven by disabling most of the control
panel command pads (except CLOCK,
TIMER SET, TIMER OFF, and LIGHT).
NOTES:
• Control lock is only available when oven
is not in use or control has not been set.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will
sound and "Lot" and PI will
appear on the temperature
display. When the control is locked, only
the clock, timer, and oven light will operate.
To unlock the control panel:
Press and hold the Start/Enter pad for
5 seconds. A single tone will
sound and "Loc" and _ will
disappear from the temperature
display.
Starting a function
After programming a function, you must
_ ress the Start/Enter pad to start
the function. If you do not press
the Start/Enter pad within
5 seconds of programming, "START?" will
show on the display as a reminder. The
control will return to time of day mode after
5 minutes if Start/Enter is not pressed.
Canceling a function
The Off/Cancel pad will cancel any function
except for the Clock and Timer
Set functions. When you press
the Off/Cancel pad, the display
will show the time of day or, if Minute Timer
is also being used, the time remaining. To
cancel the Minute Timer see page 11.
NOTE: You may hear a fan blowing in
the oven even after you press the Off/
Cancel pad. This is the cooling fan. It will
turn off when the oven cools to a certain
temperature.