Table of Contents
Advertisement
INSTALLATION STEPS
Remove oven racks and parts package from
inside oven. Remove shipping materials, tape
and protective film from range.
cardboard
shipping base
Keep cardboard shipping base under range to
prevent damage to floor coverings.
I
Excessive Weight Hazard
I
I
Use two or more people to move and install the range.
Failure to do so can result in back or other injury.
Porcelain backguard
installation
1. Move range cooktop forward about two inches and position backguard over the backguard support.
2. Attach backguard to backguard support with (4) (A) wing nuts.
A
3. On the front of the backguard, two nuts are provided on the threaded hinge pin. Remove these two nuts.
Place the cooktop on the pins. Lift the front of the cooktop and thread the two nuts on the hinge pins. Push the
cooktop down into the normal position.
-21 -
Advertisement
Table of Contents
