Table of Contents
Advertisement
Available languages
Available languages
Additional items needed:
INSTALLATION REQUIREMENTS
LOCATION REQUIREMENTS
AWARNING
Towel
Parts supplied:
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
@
mG gs
CN
AG
Place dryer at least 18 inches (460 mm) above the floor
'oe, ©
CXO
for a garage installation.
Failure to do so can result in death, explosion, or fire.
Four #12 x 5/8" hex-head
Two retainer clips
sheet metal screws
(in parts bag)
NOTE: If the washer/dryer and pedestal assembly are located
(in parts bag)
in a garage, 8" (203 mm) must be added under the pedestal so
that the washer/dryer is 18" (458 mm) above the garage floor.
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Utility knife
1/4" hex-head ratchet or
open-end wrench
Level
9/16" open-end wrench
Pliers or slip-joint pliers
Bucket
Advertisement
Table of Contents
