Recommended Use - Whirlpool YSF377PEG Use & Care Manual

Self-cleaning gas range
Hide thumbs Also See for YSF377PEG:
Table of Contents

Advertisement

Available languages

Available languages

Your
Fire Hazard
Do not let the burner flame extend beyond
the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can
result in death or fire.
Your range comes with electric ignition. Electric
ignitors automatically
light the burners each time
you turn the control knobs to LIGHT.
• Place a filled pan on the burner grate before
turning on the surface burner. Do not operate a
burner for extended periods of time without
having cookware on the grate.
• Push in the control knob and turn it counter=
clockwise
to the LIGHT
position. The clicking
sound is the ignitor
sparking. Make sure the
burner has lit.
• To stop the clicking
sound after the burner
lights, turn the control
knob to the cook
setting you want. You
can set the control
knob anywhere between HIGH and LOW.
NOTE: All four electric ignitors will click at the same
time. However, the burner with the control knob
turned to LIGHT is the one that will ignite.
Use the following chart as a guide.
SETTING
RECOMMENDED
USE
POWERTMBurner
• To provide highest heat
HIGH
• To start food cooking.
• To bring liquid to a boil.
Mid=range
• To hold a boil.
(between HIGH
• To fry chicken or pancakes.
and LOW)
• To cook gravy, pudding, or
icing.
• To cook large amounts of
vegetables.
LOW
• To keep food warm.
• To melt chocolate or butter.
• To simmer.
NOTE: Do not leave empty cookware, or cookware
which has boiled dry, on a hot surface burner. The
cookware could overheat, causing damage to the
cookware or cooking product.
POWER Burner is an adjustable setting for the left
front burner which provides an ultra-high heat
setting. It can be used to rapidly bring liquid to a
boil and to cook large quantities of food.
• To help shorten your cooking time, use the least
amount of liquid possible.
• Preheat your pots and pans only when
recommended
and for the shortest time possible.
• Start your food on a higher heat setting, then turn
the control to a lower setting to finish cooking.
REMEMBER:
When range is in use or during
the Self-Cleaning cycle, the entire cooktop area
may become hot.

Advertisement

Table of Contents
loading

Table of Contents