WAGNER QuickTouch power roller Owner's Manual page 10

• Thoroughly cleaning your unit and its components is the best way to ensure the prolonged life of your unit.
• Keep water, paint, and other residues away from the handle button. A clogged handle button will affect the
performance of your unit.
• Be sure that your unit is free from all fluids before storage. After storing your unit in extreme cold temperatures,
allow unit to reach room temperature before using.
° When storing your unit, be sure the paint hose is stored in a large loop without any kinks, if it is bent, it could be
damaged.
IMPORTANT
The areas on the roller handle and the extension indicated
below must be cleaned thoroughly and lubricated after each
use. ALL paint should be removed from the areas highlighted
in gray below, especially the quick-release tabs and all other
areas that connect with other parts. This can be done by
using the appropriate cleaning solution and an old toothbrush
(DO NOT SUBMERGE ROLLER HANDLE!).
Extension) (Handle)
Connecting
area
Quick-
release
tabs
\
Connecting Quick-
area release
tabs
In addition to thoroughly cleaning your unit after every use,
you must CLEAN and LUBRICATE the areas on the arm (a,
b, c), extension (d), and the Quick-clean
TM
inlet plug O-rings
(e) indicated below. Use a thin layer of petroleum jelly to
lubricate the indicated areas.
NOTE - DO NOT attempt to remove the Quick-clean
TM
inlet
plug O-rings, and make sure not to lose the Quick-clean
TM
inlet washer.
(b)
(d)
IO