Connections Tab - Dell Axim X50 Upgrade Owner's Manual

• Mirror Mode — This is available only in the X50v model. Mirror mode
allows users to see the same image on both the PDA screen and on an
external display using a VGA cable. When enabled, an icon will be
displayed on the command bar. To disable mirror mode, click on the
icon or clear the checkbox.
• Microphone — Adjust the microphone volume.
• Power — Check the battery or charge status. Use the Advanced tab to set
the amount of time that the device can remain idle before it turns off. .
• Regional Settings — View and change the formatting for regional
settings such as currency, time, and date.
• Remove Programs — Remove programs from your device. For more
information, see "Adding and Removing Programs" on page 115.
• Screen — Adjust the screen if your device is not responding accurately
to taps, and select the screen orientation that you want to use.
• Switcher Bar — Adjust the settings of the Switcher Bar program
launcher utility.
• System Information — View technical information about your device.

Connections Tab

• Beam — Receive infrared beams from other devices.
• Bluetooth — Turn on and off the radio with Bluetooth
technology, and create and edit bonded devices. By default, the radio is off.
• Connections — Add and configure modem and server connections.
• Dell WLAN Utility — Available only on devices with internal Wi-Fi.
Use the WLAN utility to connect to the wireless network using
EAP/TTLS.
• Network Cards — Configure your network adapter settings.
• Odyssey Client — Provides secure authentication and connection of
wireless LAN (WLAN). This is available for Mid and Hi end Axim
versions only.
®
wireless
Operating the Axim
83