Connection Diagram - Fagor VFA-70 S Care & Instruction Manual

CONNECTION DIAGRAM

The radiant cooktop hotplate is supplied with a power cable.
If the power feed wire is damaged, it must be replaced by the manufacturer, by a designated
aftersales service or by authorized personnel for safety reasons.
It must be connected to the power supply with a plug that meets the EEC 7 publication or
with a multi-pole switch with a distance between the open contacts of a least 1/ 8 inch
(3mm).
Total power
Hotplate: VFA70=5,9 KW.
PLATE
VFA70
VFA78
This device conforms to European directives 73/23/CEE and 89/336/CEE
VFA 78=7,3 KW
Voltage
Int.nominal
by phases
240V~ 29A
240V~ 31A
17
Protection
32 A
32 A