Schwinn Active series 20 series Assembly Manual page 9

Recumbent bike

Hide thumbs Also See for Active series 20 series:

Step 3 Install RaiITube Assembly

to Main Frame

Parts:

• Lower PulseWire

(22)

Middle PulseWire

(23)

RaiITube Assembly

(5) from

Step 2

= Main Frame (1)

• Allen Head Screws-

6 (16)

FlatWasher - 6 (17)

Limit Rubber Pad - 2 (18)

Tools:

• Allen Key L6

Step 3-1: Connect theLower

PulseWire

(22) to the Middle PulseWire

(23) as shown in Figure 3A.

Step 3-2: Side the RailTube Assembly

(5) onto the Main Frame (1)

and attach using 6 Allen Head Screws (16) and 6 FlatWash-

ers (17) as shown in Figure 3.

NOTE: Make sure to push Lower PulseWire (22) and the Middle Pulse

Wire (23)into the Main Frame(1) connection bracket. Ensure

the wires will not be pinched or severed when assemblingthe

RailTubeAssembly (5)to the Main Frame (1).

Step 3-3: Attach the 2Limit Rubber Pads using 2 Allen Head Screws

(16). DO NOT overtighten

screws.

Figure 3A

Figure 3

Active 20 series