Charging The Battery - Sanyo VPC-T850 Instruction Manual

Charging the Batterg
Charge the battery fully with the supplied battery charger before use.
1, insert the battery into the battery charger,
2. Connect the power cord to the charger and
insert the plug into a wall outlet.
• The status LED on the charger lights red
when charging has started and lights
green when charging is completed, The
LED also lights green if no battery is
inserted into the charger.
• Charging time varies according to the
ambient temperature and the status of battery,
• Remove the battery after charging is completed.
• The battery may feel warm after it has been charged or immediately after being used. This is
normal and not a malfunction.
• When using the camera in cold areas, keep the camera and battery warm by holding them inside
your outer clothes.
EN-16