Getting Started; Preparation; Charging The Battery - Sanyo VPC-T1495 Instruction Manual

GETTING STARTED

Preparation

1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation as shown. (label side front)
4. Insert an SD/SDHC memory card (Optional).
The camera has 32MB internal memory(23MB available for image storage), but
you can load an SD/SDHC memory card to expand the camera's memory capacity.
Be sure to format the memory card with this camera before its initial usage.
5. Close the battery/memory card cover and make sure it is locked securely.
To prevent valuable data from being accidentally erased from an SD/
SDHC memory card, you can slide the write protect tab (on the side of
the SD/SDHC memory card) to "LOCK".
To save, edit, or erase data on an SD/SDHC memory card, you must
unlock the card.
To prevent damaging of an SD/SDHC memory card, be sure to turn
off the power when inserting or removing the SD/SDHC memory card. If inserting or removing the
SD/SDHC memory card with the power on, the camera will automatically turn off.

Charging the Battery

The battery is not fully charged at the time of purchase.
Fully charge the battery and discharge it for at least one
complete cycle before use to maximize its performance
and lifetime.
1. Connect camera to USB-AC adapter with USB cable.
2. Insert the plug into a wall outlet.
Status LED
Green (blinks slowly)
Off
Green (blinks quickly)
The included USB-AC adapter differs depending on the region where you purchased the camera.
User can also charge the battery by connecting camera to computer with USB cable.
Charging time varies according to the ambient temperature and the status of battery.
EN-16
Description
Charging normally
Charging finished
Error
1
2