Network Connection =Cable - Samsung Series6 650 PN50A650 User Manual

i Network Settings and InfoLink i
To access Samsung's Infolink network feature, you must make one of the connections on the following pages.
Network Connection =Cable
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP
address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them
manually.
The Modem Port
on the Wall
1
_:xternal Modem
(ADSL/VDSLICable TV)
Modem Cab e
TV Rear Panel t Connect the [LAN] port
on the rear panel of the
TV and the external
modem with a LAN
Cable.
2 Connect the Modem
port on the wall and the
external modem with a
Modem Cable.
You can connect the LAN via a Sharer (Router).
IP Sharer
Externat Modem
TV Rear Panel
The Modem Port
on the Wail
(ADSLIVDSL/Cable TV) Modem Cable
You can connect the LAN port and the TV directly depending on your network status.
TV Rear Panel
The LAN Port
on the Wail
LAN Cable
> The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.
If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10
seconds and then try again.
> For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the corresponding
product.
> You can connect the TV to the LAN directly without connecting it through a Sharer (Router)
> You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-
connection-type ADSL modem.
I BN68 01532A Engindb 89 2008 04 18 2_ 8:38157