Connecting A Vcr - Samsung Series6 650 PN50A650 User Manual

Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according
to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1 Unptug the cable or antenna
from the back of the TV.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an Antenna Cable
between the ANT OUT
terminat on the VCR and the
ANT iN terminal on the TV.
4 Connect a Video Cabte
between the VIDEO OUT
jack on the VCR and the AV
IN 1 [Y/VIDEO] orAV IN 2
[VIDEO] jack on the TV.
5 ConnectAudio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 1 (orAV IN 2) [R-AUDIO-L]
jacks on the TV.
TV Rear Panel "13/$ide Panel
VCR Reer Panel
!io
If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to
connect to the right and left audio input jacks of the TV. Alternatively, connect the
cabte to the "R" jack.
If your VCR is stereo, you must connect two cabies.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
;'_ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does
not match the color of the video cable (Yellow).
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1 To begin, follow steps 1-3
in the previous section to
connect the antenna or cable
to your VCR and your TV.
2 Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the AV
IN 2 [S-VIDEO] jack on the
TV.
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
iN 2 [R-AUDIO-L] jacks on
the TV.
Rear Panel TV Side Panel
_] S-Video Cable{Not supplied)
An S-Video cable may be included with your VCR. (If not, check your local electronics
store.)
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cabte.
I BN68 01532A Engindb 13 2008 04 18 2_ 8:37105