Table of Contents
Advertisement
Resetting the Picture Settings to the Factory Defaults
1
To select the desired picture mode, follow the Changing
the Picture Standard
instructions
numbers 1 and 2. (see page 23)
2
Press the A or T button to select Picture Reset, then press the ENTER button.
Press the _ or _ button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
Each mode can be reset.
Viewing Picture=in-Picture
You can use the PiP feature
to simultaneously
watch the TV tuner (analog
broadcasts
only) and one external
video source.
(See page 40 to select the PiP picture sound.)
This product has one built-in
tuner, which
does not allow PiP to function
in the same mode.
Please see 'PiP Settings'
below for details.
While V-Chip (See page 57) is in operation, the PIP function cannot be used.
Picture-in-Picture
1
Press the MENU button to display the menu.
Press the & or T button to select Setup, then press the ENTER button.
Press the _, or T button to select PiP, then press the ENTER button.
Press the ENTER button again.
Press the _, or V button to select On, then press the ENTER button.
_,_ if you turn the TV off while watching in PIP mode and turn it on again, the
PIP window wilt disappear.
You can view Anatog TV broadcasts
on the PIP screen (sub-picture)
when
the main picture is from an externat device connected
to HDMI 1 ,HDMI/DVI
2, HDMI 3, HDMI 4, Component
1,2 or PC.
PiP Settings
Main picture
Sub picture
Component
1,2
HDMI 1, HDMI2/DVI, HDMI 3, HDMI 4
Analog TV broadcasts onty
PC
Chart
ina the Size of the PIP Window
Press the _, or T button to select Size, then press the ENTER button.
Press the A or T button to select the desired size of the PIP window, then press
the ENTER button.
You may notice that the picture in the PIP window becomes slightty
unnatural when you use the main picture to view a game or karaoke.
Continued...
I
BN68
01532A
Engindb
34
2008
04
18
2_
8:37139
Advertisement
Table of Contents
Troubleshooting
