Table of Contents
Advertisement
Listening to the Sound of the Sub (PIP) Picture
When the PiP feature
is activated,
you can listen to the sound of the sub (PIP) picture.
1
Press the MENU button to display the menu.
Press the ,& or T button to select Sound,
then press the ENTER button.
2
Press the A or T button to select Sound
Select, then press the ENTER button.
3
Press the A or T button to select Main or Sub, then press the ENTER button.
Press the EXIT button to exit.
• Main: Used to listen to the sound of the main picture_
• Sub:Used
to listen to the sound of the sub picture.
You can select this option when PIP is set to On. (See page 34)
Resetting the Sound Settings to the Factory Defaults
You can restore the Sound settings
to the factory
defaults.
1
Press the MENU button.
Press the A, or T button to select Sound,
then press the ENTER button.
Press the A or T button to select Sound
Reset, then press the ENTER button.
Press the < or _ button to select Reset All, Reset Sound Mode, or Cancel,
then press the ENTER button.
• Reset All: All the sound Values return to default settings.
, Reset Sound Mode: Currently set values return to default settings.
Connecting
Headphones (Sold separately)
You can connect a set of headphones
to your set if you wish to watch a TV program without disturbing
other
people in the room,
When you insert the headphone's
plug into the headphone jack, you can operate
only Preferred
Language
(in digitat TV mode), Multi-Track
Sound
(in analog
TV mode), Auto Volume,
Sound Select (in PIP mode) and Sound
Reset in
Sound menu.
;'_ Prolonged use of headphones
at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to the TV.
The headphone
volume and TV volume are adjusted separately.
Press the VOL [_q, _
button to adjust the headphone's
volume.
TV Side Panel
I
BN68
01532A
Engindb
40
2008
04
18
2_
8:37145
Advertisement
Table of Contents
Troubleshooting
