Samsung HT-BD1250 User Manual page 58

FIRMWARE UPGRADE
6. To perform the system upgrade, press the 4 _ buttons
to select Start and then press the ENTER button.
7. The system update gets started.
8. Ifyou select Cancel during the download process, you are
prompted to confirm your selection in a message box.
Ifyou want to cancel the download, select Yes and press
the ENTER button.
9. Verification will proceed. When download is done, the
firmware update process will begin automatically.
lOoWhen the installation is done, the player will automatically
turn off in 5 seconds.
All settings will revert to the factory settings. The next
time you start the system and you will see the menu
language selection window.
Ifyou want to cancel the upgrade inthe process of
downloading the upgrade data, press the ENTER
button. You will see a confirmation message.
Selecting Yeswill end the upgrade process, and
selecting Nowill continue the upgrade process.
When the system upgrade is done, check the
firmware details inthe System Upgrade menu.
Do not turn off the player during the System Upgrade,
as it may cause the player to not work properly.
You must use a USB Flash Driveto do software upgrades using the USB Host jack.
Other USB devices(ex. MP3 player)are not guaranteed to work.
There should be only one firmware upgrade file in USB flash drivefor the playerto properly
perform an upgrade.
Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
58