Setting Up The Display Options - Samsung HT-BD1250 User Manual

D av
I J I
SETTING UP THE DISPLAY OPTIONS
This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not
work with some discs or TVs.
1. With the unit in Stop mode, press the MENU button.
2. Press the ,_T buttons to select Setup, then press the
ENTER or _ button.
3. Press the ,L_' buttons to select Display Setup, then
press the ENTER or _ button.
Video setup menu will be displayed.
4. Press the ,_T buttons to select the desired display option
from the options on the following pages.
5. Press the ,_T buttons to select the desired sub-menu
item from a video display option, then press the ENTER
button.
6. Each video option is described in detail below.
_ Pressthe RETURN o r 4 button to returnto the previous
menu. Pressthe MENU button to exit the menu.
TV Aspect
Depending on the type of television you have, you may want
to adjust the screen setting. (aspect ratio)
• 4:3 LetterBox:
Select whenyouwanttoseethe total16:9
ratioscreen Bh-rayDisc/DVD supplies,
even thoughyouhaveaTVwitha 4:3 ratio
screen. B lackbarswillappear a tthetop
andbottom ofthe screen.
4:3 Pan-Scan :
Select when y ou want t osee the16:9 video
supplied bytheBlu-ray DisdDVU without the
black b ars ontopand bottom, even though y ou
have a TV witha4:3ratio screen(extreme left a nd
right p ortion ofthemovie p icture w ill b ecut o ff).
• 16:9Wide:
Youcanviewthefull16:9picture onyourwidescreen TV.
,, 16:9Normal:
Certain movies(4:3 s ource) will bedisplayed i n4:3 Pillarbox ( black barson sides of picture)
if 16:9normal i s selected.
42
Depending on the disc type, some aspect ratios may not be available.
If you select an aspect ratio which is different than the aspect ratio of your TV screen, then
the picture might appear to be distorted.