Samsung HT-BD1250 User Manual page 53

5o Press the ,_ T buttons to select DHCP, then press the
ENTER button.
®
_ If DHCP is set to On, you can't select IP Address,
Subnet Mask or Gateway.
_ If DNS is set to Auto,you can't select Primary/
Secondary DNS.
6o Press the ,_ T buttons to select a desired item, then press
the ENTER button.
,, Select an Access Point, and then press the ENTER
button to display available list of APs.
(It may take several seconds to search.)
- When you select an AP and press the ENTER
button, it tnes to connect to the designated AP.
- If successful, a notification appears.
(If selected AP shows a Lock icon, you may need to
provide secunty authentication.)
- Select your appropnate Security Access Point if it is
known. If it is not, select WEP, WPAPSK or
WPA2PSK from the list below and enter in the
password. Keep trying each Secunty Access Point
and enter the Password until a connection is made.
- Enter in the Password then press the BLUE (D)
button to connect to your access point (Router).
For further details on AP secunty, refer to the AP's (Router)user manual.
,, If DHCP is set to Off and, DNS to Manual, enter your IP
Address, Subnet Mask, Gateway and DNS Server.
Setup available
53