Rconfigunng The Sound Menu - Samsung LN22B350 Series 3 350 User Manual

C3
Configuring the Sound Menu
Mode -_ Standard / Music / Movie / Clear Voice / Custom
Youcan selecta soundmodeto suityour personal p references.
C3 Equalizer
The sound settings can be adjusted to suit your personal preference.
Mode
Selects the sound mode among the predefined settings.
, Balance L/R
Adjusts the balance between the right and left speaker.
100Hz / 300Hz / IKHz / 3KHz / 10KHz (Bandwidth Adjustment)
To adjust the level of different bandwidth frequencies.
Reset
Resets the equalizer settings to the default values.
C3
C3
C3
C3
SRS TruSurround HD -_ Off/On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
Preferred Language (digital channels only)
Digital=TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of
the program into foreign languages).
(_J You can listen in a language other than the Preferred Language by pressing the MT8 button on the remote control.
Preferred Language is available only in Digital TV mode.
{Z_ You can only select the language from among the actual languages being broadcast.
Multi-Track Sound (MTS) (analog channels only)
Press the MTS button on the remote control repeatedly to select Mono, Stereo or SAP.
o IV]ono:Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
o Stereo: Choose for channels that are broadcasting in stereo.
o SAP: Choose to listen to the Separate Audio Program, which is usually a foreign=language translation.
(_ Mumti-TraekSound is available only inAnalog TV mode.
(_ Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
Auto Volume -_ Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adiust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
(_J Auto Volume is not available in Component and HDMI mode.