Table of Contents
Advertisement
Available languages
Available languages
Configuring
the Channel Menu
Antenna
-_ Air / Cable
Before your television can begin memorizing the availaNe channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a CaNe system).
,_
Press the TOOLS button to display the Tools menu. You can also set the Antenna by
selecting Tooms_ Switch to CaMe (or Switch to Air).
CI Auto Program
Air: Air antenna signal / Cab{e: Cab{e antenna signal, / Auto: Air and Cable antenna
signals
VVhenselecting the Cable TV system: Selects the cable system. STD, HRC and IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
program menu then reappears.
If you want to stop Auto Programming, press the ENTER _
button. The Stop Auto Program? message will be displayed.
Select Yes by pressing the 4 or b,,button, then press the ENTER _
button.
Clear Scrambled
Channels
(digital
channels
only)
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30
minutes.
To stop searching scrambled channels: Press the ENTER _
button to select Stop. Press the 4 button to select Yes, then
press the ENTER _
button.
This function is only available in Cable mode.
CJ Channel
List
For detailed procedures on using the Channe_ List, refer to the 'Managing Channels' instructions.
You can select these options by simply pressing the CH UST button on the remote control.
Fine Tune (anatog channeJs only)
Use fine tuning to manually adiust a particular channel for optimal reception.
(_
If you do not store the fine-tuned channel in memory, adiustments are not saved.
(_ * will appear next to the name of fine4uned channels.
(_ To reset the fine tuning setting, press the • button to select Reset, then press the _NT_R _
button.
Managing Channels
Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.
All Channels
Shows all c urrently
available
channels.
Added ChanneEs
Shows all added channels.
Favorite
Shows all favorite channels.
_J To select the favorite channels you have set up, press the FAV.CH button on the remote control.
Advertisement
Table of Contents
