Remote Control See “Remote Control” in the owner’s instructions for details. POWER Turns the TV on and off. NUMERIC BUTTONS Press to change the channel. Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then...
Page 3
(Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI (DVI) IN jack and the audio cables to the PC/DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables TV Rear Panel Component Cable (Not supplied) Audio Cable (Not supplied) Connecting a VCR TV Rear Panel Audio Cable (Not supplied) Video Cable (Not supplied)
DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
Audio Cable (Not supplied) Video Cable (Not supplied) Each Camcorder has a different back panel configuration. ➣ When connecting a Camcorder, match the color of the connection terminal to the cable. ➣ Using an HDMI Cable HD Camcorder TV Side Panel...
PC output connector on your computer. Connect a PC Audio Cable between the PC/DVI AUDIO IN jack on the TV and the Audio Out jack of the sound card on your computer. When connecting a PC, match the ➣...
The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Support. Press the ▲ or ▼ button to select one of the icons. Then press the ENTERE button to access the icon’s sub-menu. Press the EXIT button to exit.
Press the ▲ or ▼ button to select a channel to delete, then press the TOOLS button. Press the ENTERE button to select “Delete”. Press the ▲ or ▼ button to select a channel to add, then press the TOOLS button. Press the ENTERE button and the channel is added.
• Zoom1: Magnifies the size of the picture on the screen. • Zoom : Magnifies the size of the picture more than “Zoom1”. • Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen. • :: Sets the picture to 4:3 normal mode.
Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch. Available signal sources: TV / AV / Component / PC / HDMI/DVI ➣...
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG (726-7864). Problem Poor picture Poor sound quality.
Page 14
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comuníquese con SAMSUNG WORLDWIDE Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.