No Signal Off; No Operation Off; Picture Flip - Sharp LC20S7U - 20" LCD TV Operation Manual

Useful Features (Continued)
NO SIGNAL OFF
PICTURE FLIP
Power control setting allows you to save energy.
When set to "ENABLE", the power will automatically shut
down if no signal inputs for 5 minutes.
You can set the orientation of the picture.
Setting the PICTURE FLIP on the MENU screen
Press MENU to display the Menu screen.
Press
~~
to select "OPTION".
Press
"/~
to select "NO SIGNAL OFF", and press
ENTER.
Press
"/~
to select "ENABLE", and press ENTER.
ENABLE
Press MENU to exit.
I
NOTE
>
• "DISABLE" is factory preset value.
• This function can work only in TV mode.
• If interfered with by other broadcast or radio waves, "NO
SIGNAL OFF" may not work properly even when the broad-
cast is over.
Press MENU to display the Menu screen.
Press
~~
to select "OPTION".
Press
"/~
to select "PICTURE FLIP", and press
ENTER.
Press
"/~
to select the desired mode, and press
ENTER.
Press MENU to exit.
Directly setting the PICTURE FLIP
Press PIC.FLIP to change the setting.
Press PIC. FLIP to display the PICTURE FLIP
screen.
:»8A
:»BY
[ROTATE]
To display rotated
images for special
uses.
[MIRROR]
To display mirror
images for special
uses.
[
PICTURE FLIP [NORMAL]
----+
PICTURE FLIP [MIRROR]
PICTURE FLIP [UPSIDE DOWN].... PICTURE FLIP [ROTATE]
J
YBC
ABC
[UPSIDE DOWN]
To display upside down
images for special uses.
[NORMAL]
Normal image
orientation.
Press MENU to exit.
• 5 minutes before the power shuts down, remain-
ing time is displayed every minute.
Press
"/~
to select "ENABLE", and press ENTER.
Press
~~
to select "OPTION".
Press
"/~
to select "NO OPERATION OFF", and
press ENTER.
Press MENU to display the Menu screen.
NO OPERATION OFF
When set to "ENABLE", the power will automatically shut
down if there is no operation for 3 hours.
I
NOTE
>
• "DISABLE" is factory preset value.
@33