Basic Operation; Turning On And Off The Main Power; Standby; (Input1/Input2/Input3/Tv) - Sharp LC20S7U - 20" LCD TV Operation Manual

Basic Operation
(POWER)
o
POWER indicator
• Press POWER. The LCD TV set is turned on.
On-screen display
I~s
T E R EO
SAP
MONO
I
NOTE
>
• The On-screen display disappears after a few seconds.
• To turn off the main power, press POWER again.
Turn on the power of the connected video
equipment.
Press INPUT to select the applicable input source.
The screen changes in order of INPUT1 ,INPUT2,
INPUT3 and TV mode each time INPUT is pressed.
INPUT1 mode
INPUT11
4IDP
INPUT2 mode
.INPUT21
.J.
INPUT3 mode
INPUT3]
.J.
TV mode
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn
th~
LCD TV set back on
Press POWER again. The POWER indicator will turn
green.
I
NOTE
>
• To select the "STANDBY MODE" on the MENU
screen, the TV enters standby mode. (See page 30.)
I
NOTE
>
INPUT1 : .
Used for video equipment connected to the COMPONENT
input terminals.
INPUT2 :
Used for video equipment connected to the INPUT2
terminal.
The S-video input terminal is additionally provided for
the INPUT2. If both the S-video terminal and normal
video terminals are connected with cables, the S-video
input terminal takes priority.
INPUT3 :
Used for video equipment connected to the INPUT3
terminals.
@
15