Sharp LC20S7U - 20" LCD TV Operation Manual page 25

Useful Features (Continued)
Press
JA../Y
to select "CHANNEL STRENGTH",
and then press ENTER.
• Input the 2-digit channel number to check the
strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
Press
£I'ff
to select "ANTENNA SETUP-
DIGITAL", and then press ENTER.
Press
£I'ff
to select "CH SETUP", and press
ENTER.
Press
~~
to select "SETUP".
Press
£I'ff
to select "SIGNAL STRENGTH".
• The signal strength of the DIGITAL(Air) antenna is
displayed. The signal information is based on the
current channel.
Channel Strength
Press MENU to display the Menu screen.
Press
£I'ff
to select "ANTENNA SETUP-DIGITAL",
and then press ENTER.
Press
£I'ff
to select "CH SETUP", and press ENTER.
Press
~~
to select "SETUP".
Press
£I'ff
to move the cursor to "SKIP", and use
~~
to select "ON" or "OFF".
Press
£I'ff
to move the cursor to "CHANNEL", and
use
~~
to select each desired channel to add or
erase.
Press £I'ff to select "CH MEMORY", and press-'
ENTER.
Press
£I'ff
to select "CH SETUP", and press ENTER.
Press
~~
to select "SETUP".
CH MEMORY
ADJUST CH MEMORY
•
SKIP ON
EZ SETUP
AIR/CABLE ANALOG
ANALOG CH SEARCH
DIGITAL CH SEARCH
-
A NTENNA SETUP·DIGITAL
• ANTENNA SETUP-DIGITAL-AIR
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can set the antenna
configuration through the ANTENNA SETUP DIG-
ITAL screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU to display the Menu screen.
Press MENU to exit.
I
NOTE
>-
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
• ADDING WEAK OR ADDITIONAL CHANNELS
OR ERASING UNWANTED CHANNELS FROM
TV MEMORY
Individual settings of programs can be adjusted.
Press MENU to display the Menu screen.
24 @