Blue Screen; Sleep Timer - Sharp LC20S7U - 20" LCD TV Operation Manual

Useful Features (Continued)
,BLUE SCREEN SLEEP TIMER
This function automatically turns the screen blue if no
broadcast signal is received.
You can set the SLEEP TIMER to automatically turn off
the TV.
I
AUUIO -
<....JCH
v
~ -SLEEP
ONLY
o
AVMODE
e
o
DIS~
o
<D®®
0®®
<D®®
Press
~,~
to select "OPTION".
Press ...
,y
to select "SLEEP TIMER", and press
ENTER.
Press
"'/Y/~~
to select "30MIN", "60MIN",
"90MIN", "120MIN", "150MIN" or "OFF", and press
ENTER.
Setting the SLEEP TIMER on the Menu screen
Press MENU to display the Menu screen.
Press MENU to exit.
I
NOTE
>
• After you set the SLEEP TIMER, pressing POWER on the
main unit or on the remote control will cancel the SLEEP
TIMER setting.
• 5 minutes before the SLEEP TIMER turns off the LCD TV,
"5 MIN REMAINING" is displayed on the screen for 4-
seconds. The SLEEP TIMER counts down and shows a
similar 4-second display for each remaining minute until the
timer turns off the LCD TV set.
Press MENU to display the Menu screen.
Press MENU to exit.
Press
~~
to select "OPTION".
Press .AI'''' to select "BLUE SCREEN", and press
ENTER.
I
NOTE
>
• When received signals are weak or interfered with by some
other signals, the BLUE SCREEN function may be activated.
To watch the TV under such conditions, set "BLUE SCREEN"
to "OFF".
• The BLUE SCREEN function is activated when INPUT mode
is selected with no signal being input.
Directly setting the SLEEP TIMER
Press SLEEP to display the SLEEP TIMER screen.
SLEEP TIMER [OFF]
Press SLEEP to set the sleep timer (in minutes).
C
[OFF] ~ [30MIN] ~ [60MIN] ~
[150MIN] ~ [120MIN]
+ - -
[90MIN] ~
(minutes)
I
NOTE
>
• The SLEEP TIMER screen automatically disappears in 3
seconds.
32
@