Table of Contents
Advertisement
Date and Time Display
Install the Clock Lithium Cell
1. Make sure camcorder is turned off, and
remove any power supply attached to
the camcorder.
2. Pull out the cell holder.
3. Insert the clock cell into the cell holder
with the "+" terminal facing out.
Cautions: Lithium cell battery. Must be disposed of properly. Never
handle a punctured or leaking cell. May cause burns or personal injury.
Keep out of the hands of children. Can cause death or injury if swallowed.
If swallowed, consult a physician immediately for emergency treatment.
The lithium cell used in this device may explode resulting in a fire or
chemical burn if mistreated. Do not recharge, disassemble, heat above
212˚F (100˚C), or incinerate.
Never use metallic tweezers to hold the cell, and never short circuit the +
and – sides of the cell.
28
Lithium Cell Battery
Cell Holder
4. Place the cell holder into the
camcorder.
Note: Remove the battery from the
camcorder if it will not be used for a month
or more. This will prevent possible
damage from battery leakage. If leakage
occurs, wipe up the liquid inside the
compartment and replace the battery.
Hide quick links:
Advertisement
Table of Contents
