Using The Input Button - RCA VR705HF User Manual

Using the Remote Control
MENU Displays the VCR MA1NMENU This is the first step when accessing any on-screen
menu such as LANGUAGE, PREFERENCES, TIMER RECORDINGS, etc.
MUTE Lowers the TV volume to its minimum level. Press the MUTE button again to restore
the TV's volume to its previous state.
ON*OFF Tnrns the power of the active device (either the TV or VCR) on or off.
PAUSE Pauses playback and recording in VCR mode.
PLAY Starts tape playback in VCR mode.
RECORD Starts recording in VCR mode.
REVERSE Rewinds a tape. In Playback mode, pressing and holding REVERSE starts reverse
playback. In Stop mode, pressing REVERSE fast-rewinds.
SEARCH Displays Index and Go-To Search menus on-screen. Press this button once to display
the Index Search menu and a second time to display the Go-To Search menu.
SPEED Overrides the set recording speed (either SP or SLP).
STOP Stops the active function of the VCR including tape playback, recording rewinding, and
fast-forwarding Pressing the STOP button for several seconds also ejects an inserted tape.
TRACKING +/- (up and down) buttons Allows the manual reduction of streaks which may
appear on the picture during regular or slow-motion playback. Reduces picture "jitter" during
play-pause mode.
TV Puts the remote control in TV-operating mode. This button will automatically turn on most
RCA, GE, and Proscan TVs.
TV/VCR Toggles the VCR between TV and VCR-viewing modes.
VCR Puts the remote control in VCR-operating mode.
VOL (up and down) buttons Decreases or increases the TV volume.
Using the INPUT Button
Use the INPUT button to toggle through the available Video Line Input sources (L1, L2, and
regular broadcasting signals) and regular broadcast signals. Video Line Input allows you to view
Ehe image from a connected device (like a camcorder) through the VCR.
2.
3.
Press the remote control's VCR button to activate VCR-controlling mode. Make sure that the
VCR is turned ON.
Press the remote control's INPUT button to tune to the Video Line Input source. L1
represents the rear A/V jacks and L2 represents the front A/V jacks.
Press the INPUT button again to tune back to the broadcast signal you were previously
watching through the VCR.
_hapter 3 27