Table of Contents
Advertisement
Other
Information
Streaks in picture during
normal
playback
•
Press one of the TRACKING buttons to move streaks up or down for the best picture.
Check to make sure the tape is of good quality and not worn out.
Time counter
not working
or time counter
not working
in search modes
The time counter does not advance during unrecorded
portions
of tape. When an unrecorded
segment
of tape is encountered,
the time counter will hold its count until recorded
material is detected
again.
•
A minus (-) will appear in front of the time if you rewind the tape farther back than a counter reading of
0:00:00.
•
The time counter disappears
during search; this is normal.
Will not play
•
Check to make sure there is a tape in the VCR.
•
Try ejecting and reinserting
the cassette.
•
Check to make sure the tape is not broken.
•
Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback.
Check the Pro-Tect Plus
TM
feature.
Will not Auto Channel
Search active channels correctly
•
Check to make sure the antenna
connections
are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
•
If Detect Automatically
was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try
using either CABLE TVor ANTENNA instead.
•
May not be necessary
if using a cable box for all channels. Contact your local cable company
for more
information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cassette with
its safety tab removed
does not start to play automatically
•
Check to make sure the AUTO PLAY ON/OFFfeature
is set to ON.
Time counter
disappears
during searching
•
This is normal.
There is no stereo sound during
playback
•
Make sure the Tape Playback feature is set to Hi Fi to hear stereo soiund during playback.
•
You must use A/V cables (not provided)
and jacks to connect teh VCR to the TV (or stereo) to hear true
stereo sound uring playback.
The stereo Audio
is too noisy
•
The stereo signal is weak. Set the Reception.. STEREO/SAP/MONOto
MONO.
•
Press either the TRACKING - or + button to minimize picture noise.
44
Chapter
5
Advertisement
Table of Contents
