Table of Contents
Advertisement
Connections
& Setup
Set the VCR's CH 3/4 Switch
The CH 3/4 switch on back of the VCR determines
what channel the TV must be tuned to see
the VCR's image. Choose whichever
channel
is not used locally in your area.
Note: if you connected
components
using AN jacks and cables, the VCR's signal must be
viewed using the TV's Video Line Input. To find the Video Line Input, refer to the manual
that came with the TV or see How to Find Your TV's Video Line Input on page 50 in the
Other Information
section of this manual.
Plug in the VCR
Your VCR's power cord has a plastic band strung through the blades. Remove
the plastic
band
before
plugging
the cord into the power
outlet. To remove the band, cut with a pair of
scissors and pull it free of the blades. Once the plastic is removed,
match the wide blade of the
power cord to the wide slot in the AC outlet. Be sure to insert the plug completely.
Put Batteries
in the Remote Control
l.
Remove the battery compartment
cover on the remote control.
2.
Insert new batteries
matching the polarities (+ and
) on the batteries with
the diagram in the battery compartment.
3,
Put the battery compartment
cover back on the remote.
Turn on the TV and VCR
Turn on the TV and press the VCR button on the remote control to turn it on.
Note: If you have an RCA, GE, or Proscan TV, your VCR's remote control
may be able to operate
it without
being programmed.
Press the TV button
on the remote control and then the ON,OFF button.
If neither one turns on
the TV, see Using the Remote Control
starting on page 25 for details about
programming
the remote control to operate other brands of TVs.
Tune the TV
Tune the TV to the VCR viewing channel. "]['heVCR viewing chunnel is channel
3, 4, or the TV's video line input.
•
If you connect your VCR using RF cnaxial cable only, turn the "I_,'to
channel 3 or 4 (whichever
was set on the Ctt 3/'4 switch).
•
If you connected
the VCR using A/V jacks and cahles, select the TVs video
line input. For more information
see Hnw to FDld the 7_'),- Video Line
Dlpnt
on page 50 in the Other Information
section of this manual.
Chapter
1
11
Advertisement
Table of Contents
