Table of Contents
Advertisement
Playback
Operation
and How to Copy Tapes on the VCR
1. A. Camcorder
connected directly to
TV: Turn on the TV and tune it to
the video input channel.
B. Camcorder
connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode".
(If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.)
Operate the TV as you
normally do to see the signal
coming from the VCR.
2. Place the POWER switch in VCR to
• During
playback,
use the playback
features
on pages
73-75.
4. To copy what the camcorder
is playing,
place a blank cassette
in the VCR, and
press the VCR's
RECORD
button.
Note:
Press EDIT to start camcorder
playback when copying tapes to improve
picture reproduction. Make sure the
memory-stop
feature is turned off (press
COUNTER R/M) or the camcorder will
enter play pause when the counter reaches
M 0:00:00.
5. Press STOP when you are finished.
turn on the camcorder.
The power
indicator
will light.
3. Press PLAY/PAUSE.
• If noise bars appear on the screen,
press TRACKING
- or +.
Caution:
The unauthofiz_
recording
of
.....
n e
eop_ghted
matenal may mfri g
the rights of others.
Viewing What the Camcorder
is Seeing (or Recording).........
1. A. Camcorder
connected directly to
2.
TV: Turn on the TV, and tune it to
the video input channel.
B. Camcorder
connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
3.
"camera mode".
(If your VCR does
not have a "line" or "camera
mode", consult the VCR owner's
manual.)
Operate the TV as you
normally do to see the signal
Place the POWER
switch
in CAMERA.
Note: When the camcorder is used as a
camera, turn the TV's volume down to
prevent a high-pitched squeal caused by
feedback.
Press the thumb trigger to begin
recording.
You can watch what the
camcorder
is seeing (or recording) on
the TV screen.
coming from the VCR.
Note:
The remote
control
will operate
the camcorder.
77
Advertisement
Table of Contents
