Table of Contents
Advertisement
Tally Light
To Turn the Tally Light ON or OFF
1. Follow steps 1-4 on the previous page.
2. Press • or • on the mode select dial
to highlight Tally.
Interval Timer
OFF
Rec "Rme
OFF
JLIP ID NO.
0 7
3. Press • on the mode select dial to start
Tally flashing.
4. Press • or • on the mode select dial
to turn the tally light ON or OFF.
•
Select ON to have the tally light
turn on during recording.
•
Select OFF if you do not want the
tally light to light.
5. Press • to stop Tally flashing.
6. Press MENU to exit the menu.
Set the JLIP
ID NO.
:
:
The camcorder
has a JLIP (Joint Level Interface Protocol) connector that may be
used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1. Follow steps 1-4 on the previous page.
2. Press • or • on the mode select dial
to highlight JLIP ID NO.
Tally
ON
Interval Timer
OFF
Rec Time
OFF
JUPID NO,
O_
3. Press • on the mode select dial to start
JLIP ID NO. flashing.
4. Press • or • on the mode select dial
to a number from 01 to 99.
5. Press • to stop JLIP ID NO. flashing.
6. Press MENU to exit the menu.
55
Advertisement
Table of Contents
