Internal
clock shows incorrect
time or date
•
Power interruption.
•
Check to make sure the clock is set accurately (check AM/PM and date).
•
Check Auto DST setting. The clock may have adjusted for daylight-saving time.
Time did not adjust for daylight-saving
time
•
Check to make sure Auto DST feature
isturned on.
VCR makes noise when
stopped
•
VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate
for a few minutes after you put the VCR in the stop mode.
Will
not Auto Channel
Search active channels correctly
•
Check to make sure the antenna connections
are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
•
If Detect Automatically
was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using
either CABLE TV or ANTENNA.
•
May not need to auto channel search if using a cable box. Refer to the VCR Channel List or contact your
cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal
playback.
Cannot
select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.
Cassette
with
safety tab removed
does not start to play automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER
indicator
flashes
•
Clock is not set.
•
Check to make sure there is a cassette in the VCR when a timer recording
is set.
Time counter disappears during searching
•
This is normal.
On-screen
menus appear
in English, French
or Spanish
•
Check Language feature.
52