Tm Feature - RCA CC6262 User Manual

Exposure Control
(continued)
EXPOSURE
AUTO
_U
E rr
4. Rotate the menu PUSH dial to
highlight MANU (manual) and press
the dial in. The exposure indicator
(00) appears in the viewfinder.
5. Adjust the exposure for a dark or
bright subject. The exposure you
select appears in the viewfinder.
• To brighten the image, rotate the
menu PUSH dial up. You can
adjust the exposure to +06.
• To darken the image, rotate the
menu PUSH dial down. You can
adjust the exposure to -06.
6. Press the menu PUSH dial in twice to
select an exposure and remove the
menus from the viewfinder.
Notes: To return to auto exposure, select
AUTO in the EXPOSURE menu or set the
POWER switch to CAMERA AUTO.
Conditions Requiring Manual
Exposure
• When recording with a bright back-
ground or reverse lighting.
• When recording with a very dark
background or very bright subject.
• When recording a reflective natural
background -- such as a beach or
when skiing.
Steady Pix
TM
Feature
The steady pix feature corrects slight
shaking of images during some recording
modes.
• While zooming in on a distant subject.
• When recording an approaching small
subject.
• When recording while walking or
riding in a vehicle.
• When recording through a vehicle's
window.
To Use the Steady Pix
TM
Feature
• Press the STEADY PIX button to turn
steady pix on. The steady pix indicator
(_,)
appears in the viewfinder.
• Press the STEADYP1X button to turn
the steady pix feature off. The steady
pix indicator (_) disappears.
Notes: Turn steady pix off when using a
tripod.
There is a small change in the picture size
when using steady pix.
Accurate stabilization may not be possible if
hand shake is excessive or when shooting the
following:
• Subjects with'vertical or horizontal stripes.
Dark or dim subjects.
Subjects with excessive backlighting,
Scenes with movement in various
directions.
Scenes with low-contrast backgrounds.
41