RCA CC6262 User Manual page 55

Time-Lapse Recording (continued)
• Select 15S to delay the recording
for 15 seconds.
• Select 30S to delay the recording
for 30 seconds.
• Select 1M1N to delay the recording
for 9ne minute.
SeleCt 5MIN to delay the recording
for fi')e minutes.
• Select OFF if you do not want the
camcorder to delay recording.
6. Press the menu PUSH dial in to
display the menu again. Rotate the
menu PUSH dial to highlight REC
TIME and press it in to display the
REC TIME menu.
REC TIME
OFF
1/4S
1/2 S
1S
5S
EXIT
8. Press the menu PUSH dial twice to
exit the menus.
'i and the amount of recording time
and _ and the amount of interval
time between recordings appear in
the viewfinder.
_._ 15s
•6m 5s
9. Press the thumb trigger to start
recording.
Note: The camcorder starts and stops
recording the selected amount of time.
The tally light flashes with the flash
speed increasing five seconds before
recording begins.
Note: Fade does not operate during animation
or time-lapse recording.
7. Rotate the menu PUSH dial to
highlight the amount of time you
want the camcorder to record.
Select 1/4S to record for 1/4
second.
Select 1/2S to record for 1/2
second.
• Select IS to record for one
second.
• Select 5S to record for five
seconds.
• Select OFF if you do not want
to record for a selected amount
of time.
To Stop Time-Lapse Recording
Set the REC TIME and INT. TIME in the
menus to OFF.
53