Table of Contents
Advertisement
material during playback. Each press advances the tape an
additional
30 seconds up to five minutes.
SLOW
Used for slow-motion
playback.
SPEED Selects a recording
speed (SP or SLP).
STOP Stops the current VCR function
such as record, playback,
rewind, or fast forward.
This button
also ejects a tape if pressed
and held for three seconds.
TRACK - or + Lets you manually
reduce the streaks that may
appear on the picture during play, slow motion,
or pause.
Reduces picture "jitter"
during stop-action
playback.
TV.VCR
Switches the picture signal so that it either comes from
the VCR or cable/antenna
system.
PLAYING
A TAPE
1,
Tune the TV to your VCR viewing
channel (3, 4, or TV's video
input) and hit the TV.VCR button
on the remote so that the
VCR display appears on the VCR's front panel.
2.
Insert a tape in the VCR.
r-=======_I
The tape automatically
begins playback (if the safety tab on
the cassette is removed).
•
Press FWD or REV to position the tape.
•
Press PLAY.PAUSE (if necessary) on the VCR (PLAY on remote)
to begin tape play.
•
Press PLAY.PAUSE (PAUSE on remote) for stop action.
•
Press TRACK minus (-) or plus (+) to remove any streaks from
the picture,
if necessary.
•
Press STOP.EJECT on VCR (STOP on remote) to stop playback.
The VCR display indicates
that the unit is in
VCR mode, suitable
to watch a tape_
Pause
If you pause, the VCR automatically
switches
from
pause to stop after
a
few minutes
to reduce tape wear.
]
Automatic
Tracking
The VCR has automatic
tracking
which adjusts
the picture when
playing
back a tape
recorded
on
another
VCR. Automatic
tracking
is turned
on whenever
a tape
is
inserted
or the VCR's power
is
turned
on.
23
Advertisement
Table of Contents
